Tesla Cybertruck Recalled for Sticking Accelerator Pedal

Tesla has been ordered to recall nearly 4,000 of its Cybertrucks due to an accelerator pedal that can stick in place when pressed down.

The cause, according to the regulator: soap.

The NHTSA mentioned in the recall document that an unauthorized change was made by adding lubricant (soap) to help assemble the pad onto the accelerator pedal. This caused the pad to not stay securely on the pedal due to leftover lubricant.

Tesla has not revealed the exact number of Cybertrucks they have made so far. However, they have stated that production of the futuristic-looking vehicle will be gradually increased, with initial deliveries starting in late November.

The recall issued by the NHTSA applies to all Model Year (‘MY’) 2024 Cybertruck vehicles produced between November 13, 2023, and April 4, 2024.

This means that the 3,878 trucks being recalled are most likely a significant portion, if not all, of the Cybertrucks currently in use on roads in the United States.

Documents from the National Highway Traffic Safety Administration mention that if the accelerator pedal pad is pushed too hard, it could come loose and get stuck in the trim above it.

According to the safety regulator, employees at Tesla's factory in Texas made a mistake by using soap to help attach the pad to the accelerator pedal.

The accelerator sticking issue was first raised in social media and online discussion group posts.

On Monday, NHTSA told CNN it had reached out to Tesla requesting more information on the issue.

Telsa did not respond right away when asked for a comment. The company informed its employees earlier this month that about 10% of its global workforce would be laid off.

This particular Tesla recall is different from others because it cannot be fixed with a quick software update. Owners will need to bring their Cybertrucks to Tesla's service centers for a repair, which will be done at no cost.

Editor's P/S:

The Tesla Cybertruck recall highlights the importance of meticulous assembly practices in vehicle manufacturing. The issue of accelerator pedal pads sticking due to unauthorized use of lubricant is a serious safety concern that could potentially lead to accidents. It is concerning that such a fundamental assembly error could occur, especially in a high-profile vehicle like the Cybertruck.

The recall affects a significant portion of the Cybertrucks currently in use, underscoring the magnitude of the problem. While Tesla has yet to disclose the exact number of Cybertrucks produced, the fact that nearly 4,000 vehicles are affected suggests that a substantial number of the vehicles on the road may be at risk. The issue requires immediate attention, and owners should promptly bring their vehicles to service centers for repairs. Tesla's decision to cover the repair costs demonstrates their commitment to addressing the problem and prioritizing customer safety.